GE IS200TVBAH2A Vibration Interface Board

GE IS200TVBAH2A Vibration Interface Board

Product Code: IS200TVBAH2A
Availability: In Stock
Viewed 7 times

The GE IS200TVBAH2A is an industrial vibration signal interface board developed for the Mark VIe turbine control platform. Its primary function is to connect vibration sensors with the system's compatible I/O processing hardware.

Ship to you via Fedex/DHL/TNT/UPS/EMS  丨 Package: Original packing with cartons  丨 Shipping Port: Xiamen   

·Manager: Jinny

·E-mail:sales1@xrjdcs.com

·Tel: + 86-15359273791 (WhatsApp)

·Wechat: + 86-15359273791

Product Description

GE IS200TVBAH2A

Product Description

The GE IS200TVBAH2A is an industrial vibration signal interface board developed for the Mark VIe turbine control platform. Its primary function is to connect vibration sensors with the system's compatible I/O processing hardware.

In turbine applications, continuous vibration monitoring is essential for identifying mechanical abnormalities and maintaining equipment stability. Therefore, this board provides an important connection point between field instrumentation and the turbine control system.

The design supports different sensor technologies, allowing operators to monitor shaft position, vibration velocity, and acceleration signals within compatible system configurations.

Functional Design and Advantages

1. Multiple Sensor Interfaces

The board accepts signals from eddy-current probes, seismic sensors, Velomitors, and accelerometers. It also supports dynamic pressure measurement through compatible charge amplifiers.

2. Signal Conditioning and Protection

Each input incorporates signal protection features, including transient suppression and EMI protection. These functions help reduce the impact of electrical disturbances on sensitive measurement circuits.

3. External Monitoring Connections

Buffered outputs are provided through DIN and BNC connectors on this hardware revision. As a result, selected vibration signals can be supplied to external monitoring equipment, including compatible Bently Nevada systems.

4. Redundant System Support

The board can be configured for simplex or TMR applications. In TMR installations, signals can be distributed to three separate I/O packs for redundant processing.


Hardware Configuration

The main hardware arrangement includes two 24-point terminal blocks, a 37-pin I/O pack connector, sensor configuration jumpers, buffered output circuits, and associated power interfaces.

The board supports 14 sensor input connections. In addition, its configurable jumper arrangement allows technicians to adapt signal paths and sensor power settings to the application requirements. For the H2A revision, the buffered DIN and BNC output features are particularly useful for external vibration monitoring.

Typical Applications

  • Gas and steam turbine vibration monitoring.

  • Power plant rotating equipment supervision.

  • Industrial compressor monitoring.

  • Generator and turbine condition monitoring.

  • Mechanical protection and diagnostic systems.

  • Distributed turbine control installations.

Maintenance and Compatibility Considerations

To maintain reliable operation, periodically check the terminal blocks, wiring shields, connectors, and jumper positions. Sensor cables should also be inspected for damage, loose connections, and electrical interference.

The H2A version is designed for compatible PVIBH1A and PVIBH1B I/O packs. For sensor power configurations requiring negative 28 V DC, the appropriate WNPS daughterboard arrangement must also be verified.

Before replacement, confirm the complete hardware revision, I/O pack compatibility, and cabinet wiring configuration against the original GE documentation.

Write a review

Note: HTML is not translated!
    Bad           Good

The GE IS200TVBAH2A is an industrial vibration signal interface board developed for the Mark VIe turbine control platform. Its primary function is to connect vibration sensors with the system's compatible I/O processing hardware.

Ship to you via Fedex/DHL/TNT/UPS/EMS  丨 Package: Original packing with cartons  丨 Shipping Port: Xiamen   

·Manager: Jinny

·E-mail:sales1@xrjdcs.com

·Tel: + 86-15359273791 (WhatsApp)

·Wechat: + 86-15359273791