GE DS200DCFBG2BNC-MRP420024

The GE DS200DCFBG2BNC MRP420024 is a core component of the GE Mark V series of automated drive assemblies, designed specifically for the control systems of gas turbines, steam turbines, and wind turbines. As part of the Speedtronic control system, this board ensures precise control and safe operation of industrial equipment by providing stable DC power supply and signal processing functions. Its design integrates high reliability, modular integration, and flexible configuration capabilities, making it widely used in power plants, petrochemicals, iron and steel metallurgy, and other fields.

Parameters

Input Voltage:

• AC input range: 38 VAC to 115 VAC (compatible with a wide voltage range).
• Some data mention 120/240 VAC (may be differences in different models or versions).

Output Voltage:

• Provides ±5V, ±15V, ±24V DC, used for control logic, signal processing, and motor/generator excitation circuits.

Output Frequency:

• 0 to 500 kHz (depending on input voltage).

Operating Temperature:

• -20°C to 70°C (some data mention -40°C to 85°C, subject to the actual model).

Dimensions and Weight:

• Dimensions: Not explicitly marked, but similar modules are usually of compact design.
• Weight: Approximately 1.5 kg (there are differences in different data, subject to official data).

Product Features

• Integrates AC/DC monitoring circuits to ensure stable power output.
• Adopts redundant design and triple voting function (for some models) to improve system fault tolerance.

• Includes control power supply, motor excitation, drive circuits, and signal processing modules, directly participating in core control functions.
• Supports multiple signal input and output (such as 18 plug connectors, 9 pin connectors).

• Provides 12 jumpers and 7 DIP switches, allowing users to adjust parameters according to needs.
• 2 LED indicators and 1 neon light for real-time status monitoring.

• Equipped with 3 protective fuses to prevent damage to equipment from overcurrent or surges.
• Normal coated PCB design to enhance environmental adaptability.

Structure and Composition

• Transformers: 7, used for voltage conversion.
• Electronic components: Including oscillation chips, relays, resistor network arrays (carbon composite resistors/metal film materials), capacitors, etc.
• Heat sink: Built-in heat dissipation design to ensure stable operation in high-temperature environments.

• Sends/receives signals through 18 plug connectors and 9 pin connectors.
• Connector layout is concentrated in the upper left corner (V1-V3, P1A, etc.).

• 5 test points (TP) for voltage detection and troubleshooting.

Application Fields

• Provides power supply and feedback signals to support precise control of gas turbine startup, operation, regulation, and shutdown processes.

• Provides key power for the yaw system, pitch system, and generator converter of wind turbines.

• Compatible with GE DC2000, AC2000, and other series of drives, suitable for steel rolling, paper machines, pump stations, and other scenarios.

• Ensures long-term stable operation of equipment in thermal power plants, nuclear power plants, and water treatment facilities.

Installation and Maintenance

• Safe operation: Power must be disconnected before installation, and the "Lockout/Tagout" (LOTO) procedure must be followed to prevent accidental energization.
• Anti-static measures: Wear anti-static wristbands and gloves to avoid ESD damage to the module.
• Environmental check: Confirm that the temperature and humidity of the installation location meet the specifications (-20°C to 70°C).

• Regular cleaning: Remove dust and oil stains, especially focusing on heat dissipation areas and connectors.
• Connection check: Inspect the tightness of power input/output and signal cables quarterly.
• Status monitoring: Real-time monitoring of operating status through LED/neon indicators; any abnormalities must be checked immediately.
• Use of test points: Use 5 test points to monitor key voltages to assist in fault location.

————————————————————————————————————————————————————————————————————————

Xingruijia

Original factory direct supply, quality assurance - GE module professional supplier

Consult now to obtain the latest technical information and quotation for GE modules!

·Manager: Jinny                                         ·E-mail: sales1@xrjdcs.com     

·Tel: + 86-15359273791（WhatsApp）   ·Wechat: + 86-15359273791

————————————————————————————————————————————————————————————————————————